[openBVE] SG : East West Line [EB: JKN to RDH]
-
Originally posted by flightsimmer:
Haha, anyone notice the part at dover? just to comment, the rails are up and the yellow line wrong side on the left platform!
I am trying to do the patch
The progress:
The reason for a part of the platform NOT aligned is for testing purpose. It can be seen that the left side platform (The main rail that your car is moving towards) has no support, just a flat rectangle floor panel only. The Westbound on the right, however, has the correct support etc, such that it is not a 2D rectangle floor platform. I cant release it right now as it is not ready. Breakfast time!!!
Mod-edited for quote formatting.
-
Originally posted by Samuel Lee:
I am trying to do the patch
The progress:
The reason for a part of the platform NOT aligned is for testing purpose. It can be seen that the left side platform (The main rail that your car is moving towards) has no support, just a flat rectangle floor panel only. The Westbound on the right, however, has the correct support etc, such that it is not a 2D rectangle floor platform. I cant release it right now as it is not ready. Breakfast time!!!
Thanks Samuel! Could I use the dover patch for my official release?
-
Originally posted by Veyron16.4:
Thanks Samuel! Could I use the dover patch for my official release?
Sure, but as I said again: The patch is NOT fully completed due to the side support, maybe you PM me ur MSN and we discuss how to shift the side thingy. (See my facebook album and you know what I am talking about)
Meanwhile, you just use the above patch for fixing the error message lo.
-
Originally posted by Samuel Lee:
Sure, but as I said again: The patch is NOT fully completed due to the side support, maybe you PM me ur MSN and we discuss how to shift the side thingy. (See my facebook album and you know what I am talking about)
Meanwhile, you just use the above patch for fixing the error message lo.
i think it is winrar's fault.
Because if I use the Platform 1, 2a and 2b on my computer, it shows no error message. But, if i use the downloaded one, an error message appears.
-
Originally posted by Veyron16.4:
i think it is winrar's fault.
Because if I use the Platform 1, 2a and 2b on my computer, it shows no error message. But, if i use the downloaded one, an error message appears.
Ok, The first patch (Not the dover unreleased one, which I currently seek Willis's help) is because the Platform 1 got the extra word 'Platform', hence either you remove the extra word (And get rid of image not found issue) or rename the 'platform side 1.bmp' to 'platform platform side 1.bmp' (No sense to me).
Regarding Platform2a and 2b, the are SAME commands in the SAME Line repeating!!!
Is like
LoadXXX ,1,2,3,LoadXXX ,1,2,3,LoadXXX ,1,2,3,LoadXXX ,1,2,3,LoadXXX ,1,2,3,LoadXXX ,1,2,3,LoadXXX ,1,2,3,LoadXXX ,1,2,3, and if you turn on auto wrap with line numbers, you will see a line number contains all these in italic.
-
Latest update which includes Dover patch (Except the station support is not polish well enough):
Patch deleted. See the next post for reason.
Preview Image:
Since Veyron has thanked me for the patched image earlier, I just release it. Is this consider a developer? Pss....psss.......
Note: The earlier released patch is just to get rid of the error message by correcting it. Apparently, it fixed the issue of passenger's discomfort when you even stop (N gear, not B1 or B3 or P1 etc) at Terminus station although it is yet to be confirmed (At least my Bedok - Kembangan route is so).
This patch thus will integrate the previous patch and that is why the older patch is removed. Thus, it is strongly demanding downloaders to install this patch and any previous patch that I have made will NOT be supported.
To Veryon: How about you helping me to fix the remaining issue on the platform support that makes a 3D view on the left platform? It is quite tricky.
-
The Update 3 is ready to release. It changes the 15m gap to 17m such that it follows the standard of CGL line and NS Line. Thus, now it is possible to have a roof, including Dover.
Link: Link Removed because Patch 4 is officially released.
Please update to this Version 3 instead as it contains includes Version 1 & 2.
-
I think for Dover stn, the most impt thing now is to remove the side railings, and add the roof. Small details can be added at a later time.
-
Welcome Samuel, to my codeveloper's list!
-
Originally posted by jcqh:
I think for Dover stn, the most impt thing now is to remove the side railings, and add the roof. Small details can be added at a later time.
The Update 2 did have the side railings hidden in the platform, as shown in the image.
Pss... Pss, Co developer got moderator access?
-
Originally posted by Samuel Lee:
The Update 2 did have the side railings hidden in the platform, as shown in the image.
Pss... Pss, Co developer got moderator access?
You'll have to ask willis about it
-
Oh i see, but anyway, it seemed that a Patch 4 is needed to fix the converging / diverging tracks issue.
I am preparing right now and once this patch 4 is done, I am gonna apply to my Bedok - Eunos route.
-
Ok, so I released the Patch 4 Release Candidate 2 first. Basically it is an attempt to smoothen the curves and it has added wires in Dover left side platform to make it look 3D. It may not be perfect as the right platform but Developers may take a look.
Link Removed.
Edited: This is a Release Candidate Second Version of the patch, meaning, I may remove the Patch 3 at anytime once I got enough feedbacks on the quality. I will update more on here.
Unfortuantely, due to the fact that I had confused myself which file I have patched and many other considerations, this will be a Full version instead of patch version.
Note: There is not much visible changes on RC 1 to RC 2 except the possible platform issue (Seemed to see only my Bedok route which hence release this, Or was I mistaken during my development and the RC1 was not contaminated anyway??)
PS: It is the SAME as the Bedok - Kembangan Alpha 2 because I release as a whole for convience. Hence, if you have my Bedok route, then you wont need this.
Updated: Due to the integration of Bedok - Kembangan route, I have to update this as well. Basically there are NO changes except now my Westbound route got sound / announcement.
-
East West Line Patch 4 RC is now released!!! Please test it. Thank you.
By the way, does East West Line have anything similar to North South Line's official homepage??
-
By the way, this Patch 4 RC is possible to have 0 passenger discomfort and I got 268/300 (3 stopping stations only and each is 100 point -- Dover, Bunoa Vista and Commonwealth).
This is because my positioning is not correct and late.
Screenshot:
-
<Shouting> How come so cold respond ah!?
-
PS: All the patches given are removed because it is now integrated with Bedok - Aljunied route.
See http://www.sgforums.com/forums/3146/topics/392828 for details (Bedok - Aljunied route)
Edited: Hope Veyron can make full use of my patch and extend it for better use.
-
Any updates on CLE - COM / QUE??
-
Originally posted by Samuel Lee:
Any updates on CLE - COM / QUE??
Well...Yes....
I have extended the route to Queenstown
-
Originally posted by Veyron16.4:
Well...Yes....
I have extended the route to Queenstown
Wow, any idea when can it be released??
-
Originally posted by Samuel Lee:
Wow, any idea when can it be released??
End March-Early April....
-
Update: 16th March 2010
Here is a short update of the EWL route.
Edited parts:
*Clearer announcements
*No more errors
Full Version:
Update Version:
-
Poll: How many people rather I release the Queenstown Extension first then perfect the route later or just release the perfected route at the end of this month?
-
Originally posted by Veyron16.4:
Poll: How many people rather I release the Queenstown Extension first then perfect the route later or just release the perfected route at the end of this month?
I rather you perfect the route then release, however, maybe you would like to release your progress to the developers / co-developers to assist you??
-
To Veyron: I would like you to check this (unofficial) updated patch which is intended to fix all the error messages in CLE - COM. This is based on Jian Rong's patch and it is a work jointly done by both of us.