[openBVE] Development updates: C751B
-
There has been some copyright issues going on around and I'm very disappointed. Despite the warnings that I have gave, that particular person continued to break the copyright law. My advise to you is to stop. If you persist, the consequences will be undeniable.
-
i spotted Something Missing From The C751B which is the Exterior Orange Light that lights up when the Train Doors Are Open.
-
Originally posted by SBS9231S:
i spotted Something Missing From The C751B which is the Exterior Orange Light that lights up when the Train Doors Are Open.
They will be added when they have accomplished something they haven't done yet. 1 example(Willis is planning to do the roofs of the C151 before adding the exterior door open or close light indicator). -
Originally posted by kenneth1228:
They will be added when they have accomplished something they haven't done yet. 1 example(Willis is planning to do the roofs of the C151 before adding the exterior door open or close light indicator).Lol Thanks Anyway SBS7322B Whr u spot ur Work Being Reproduced under another person name wors
-
Originally posted by kenneth1228:
They will be added when they have accomplished something they haven't done yet. 1 example(Willis is planning to do the roofs of the C151 before adding the exterior door open or close light indicator).Ahh... Btw , will the blinking light above the doors of the C151 added? Whenever the doors closing annoucement comes up , it will blink...... I hope u understand what i meant.......
-
Originally posted by Operation//Overkill:
Ahh... Btw , will the blinking light above the doors of the C151 added? Whenever the doors closing annoucement comes up , it will blink...... I hope u understand what i meant.......
Currently. The animation cannot be done but we can put the light there but no animations.
-
Originally posted by Operation//Overkill:
Ahh... Btw , will the blinking light above the doors of the C151 added? Whenever the doors closing annoucement comes up , it will blink...... I hope u understand what i meant.......
This Is The C751B Thread. i assume u are talking abt the 2 Side Blinking Lights When the doors Are closing.
-
Originally posted by Operation//Overkill:
Ahh... Btw , will the blinking light above the doors of the C151 added? Whenever the doors closing annoucement comes up , it will blink...... I hope u understand what i meant.......
Oh, I think you meant the lights blinking when the doors closing buzzer sounds. Looks like openBVE dosen't support that right now. -
Originally posted by SBS9231S:
This Is The C751B Thread. i assume u are talking abt the 2 Side Blinking Lights When the doors Are closing.
Nope. The blinking lights are red.
He meant these:
EDIT: Oops. My mistake. Both can be implemented... I think.
My door closing indicator: http://www.youtube.com/watch?v=StTRd5JFW4o
-
Both CAN be done, only one sideback for the doors closing indicator (not the doors open indicator on the exterior, both are different)
Real life: Red Light Emitting Diode flashes when doors closing announcement plays.
openBVE: Red Image "Light" flashes when doors closes.
-
Originally posted by SMB7322B:
There has been some copy issues going on and I'm disappointed. The warning I have give, that person break law. My advise is stop. If persists, the consequences denied.
DELETED -
Originally posted by Funkymark4211:
If its me, sorry..... btw i'm a computer 'geek' and i like to see behind the scenes and try it. :) / :l
If you want to develop a train, please please please please please do one yourself, not editing other's work.
-
Originally posted by yellowflip999:
Both CAN be done, only one sideback for the doors closing indicator (not the doors open indicator on the exterior, both are different)
Real life: Red Light Emitting Diode flashes when doors closing announcement plays.
openBVE: Red Image "Light" flashes when doors closes.
Who says? I did it again!
-
Originally posted by joeyfjj:
Nope. The blinking lights are red.
He meant these:
EDIT: Oops. My mistake. Both can be implemented... I think.
My door closing indicator: http://www.youtube.com/watch?v=StTRd5JFW4o
i din Say It wasnt RED Lol. Anyway Yea i was saying earlier on About This Light shown in the picture
-
Originally posted by SBS7322B:
There has been some copyright issues going on around and I'm very disappointed. Despite the warnings that I have gave, that particular person continued to break the copyright law. My advise to you is to stop. If you persist, the consequences will be undeniable.
If its the C830 thingy, I won't actually say that it broke the copyright rules, as the work/product wasn't released to the world yet.
But of course, if it's someone else, then whatever I said above is *toooooooooooot*.
[Add-on] If you are a "geek", best, develop the train your own lah.
-
Originally posted by jerryonhere:
If its the C830 thingy, I won't actually say that it broke the copyright rules, as the work/product wasn't released to the world yet.
But of course, if it's someone else, then whatever I said above is *toooooooooooot*.
[Add-on] If you are a "geek", best, develop the train your own lah.
What do you mean by someone else? U mean the C751B thingy?
-
Originally posted by Samuel Lee:
What do you mean by someone else? U mean the C751B thingy?
Someone else, other than Funkymark4211.
-
Originally posted by joeyfjj:
Nope. The blinking lights are red.
He meant these:
EDIT: Oops. My mistake. Both can be implemented... I think.
My door closing indicator: http://www.youtube.com/watch?v=StTRd5JFW4o
I was not refering to this.... But i would like to see these in the upcoming C751B patch..... I was refering to the blinking lights inside the train itself.... "Doors are closing" and the lights will blink... Similar to the blinking light of the reburbed C151......
-
Originally posted by jerryonhere:
Someone else, other than Funkymark4211.
OFF TOPIC: Lol Saw u In habbo Today? LOL
Yea, But The Position Of The Door Closing Indicator Lights on the C751B and C151 Are Different
-
Can I ask something... Based on Willis' Developers' Resource: Standards, the C751B should have run sounds when the track is Run Sound #1 and #2. Therefore, it can be concluded that Run Sound #1 is Jointed rails, concrete sleepers and jointed track higher linespeed with wind noise and Run Sound #2 is Continuous welded rail :
Run sound # Train WAV File Description
0 Run0.wav Jointed rails, wooden sleepers
1 Run1.wav Jointed rails, concrete sleepers and jointed track higher linespeed with wind noise
2 Run2.wav Continuous welded rail
3 Run3.wav Continuous welded rail - Tunnel and bridge
4 Run4.wav Jointed rails, wooden sleepers - Tunnel and bridge
5 Run5.wav Passing train sound, continuous welded rail
6 Run6.wav Continuous welded rail on steel bridge
7 Run7.wav Passing train sound, jointed rails
So, anyway, RouteBuilder gives the description only, so I adjusted the track types for the overground tracks to be Continuous welded rail and the underground tracks to be Continuous welded rail. However, when I play my "track-types-are-already-adjusted" routes and there is no sound at all when the C751B runs on overground tracks. What is the problem, then?
-
Originally posted by Nickgoh45:
Can I ask something... Based on Willis' Developers' Resource: Standards, the C751B should have run sounds when the track is Run Sound #1 and #2. Therefore, it can be concluded that Run Sound #1 is Jointed rails, concrete sleepers and jointed track higher linespeed with wind noise and Run Sound #2 is Continuous welded rail :
Run sound # Train WAV File Description
0 Run0.wav Jointed rails, wooden sleepers
1 Run1.wav Jointed rails, concrete sleepers and jointed track higher linespeed with wind noise
2 Run2.wav Continuous welded rail
3 Run3.wav Continuous welded rail - Tunnel and bridge
4 Run4.wav Jointed rails, wooden sleepers - Tunnel and bridge
5 Run5.wav Passing train sound, continuous welded rail
6 Run6.wav Continuous welded rail on steel bridge
7 Run7.wav Passing train sound, jointed rails
So, anyway, RouteBuilder gives the description only, so I adjusted the track types for the overground tracks to be Continuous welded rail and the underground tracks to be Continuous welded rail. However, when I play my "track-types-are-already-adjusted" routes and there is no sound at all when the C751B runs on overground tracks. What is the problem, then?
Should be the run sound, in the WithRoute, thingy, wrong number.
-
To the developers of C751B:
Would you all mind if I make a advertisement on C751B and place it in the AEL?
-
Originally posted by Nickgoh45:
To the developers of C751B:
Would you all mind if I make a advertisement on C751B and place it in the AEL?
There's only one developer and yeah, you are allowed.
-
Hey I Have Just Requested The Creator (RonBVE) Of The C751B Object (the 1 in ang mo kio) For Permission To Make It Into A Train, Awaiting Reply For Now...
-
Originally posted by SBS7491X:
Hey I Have Just Requested The Creator (RonBVE) Of The C751B Object (the 1 in ang mo kio) For Permission To Make It Into A Train, Awaiting Reply For Now…
Did you make a mistake here? By the way, the user SBS7322B had created a workable C751B train (But there are rooms for improvement) and did not use the C751B object at all. Well, I suggest you to use that to tweak it to C151 object, we will be appreciated if you do so instead doing another C751B train. (Note: The object does not have sound etc, and it is not a proper train, apart of visual item)