Wireless Linksys Connection Problem
-
Hi there,
Its me again
my connection problem still have not resolved, pls help.
I've a Linksys router model WAG325N & a Belkin N1 wireless adapter (both N range), it suppose to allow user to connect wirelessly for quite a distance but unfortunately is not especially when i brought my lap-top away from where my router is (20 ft with thick walls in between), i can't connect at all, received no signal.
When i brought my lap-top close to where my router is again, I've no problem connecting it.
All the while I thought N range product has the strongest signal but how come I m just 20 ft away & I couldn't connect at all, strange isn't it.
Decided to go to my Linksys webpage & made some changes to the settings but still couldn't received the signal.
I wonder my settings are correct, can someone pls guide me along.
Radio Band : Standard – 20 MHz Channel
Wide Channel : 9
Standard Channel : 11 – 2.462 GHz
May I know what are the above 3 channels for ?
Once again thanks for all the help, really appreciate that, thanks a million. -
They are for the B/G band connections.
20 MHz Channel literally means your channel is 20MHz wide. That is, the difference between frequencies from each channel 20MHz.
Your Wide Channel: I'm guessing is for your N, while Standard Channel is for your BG.
It seems to me that channels 9 and 11 are a lil too close and might be overlapping. Try switching one of them to Channel 1 or something. -
just a question.. when ur laptop is able to connect to ur router, does it get disconnected after a while?
-
...get a repeater...
-
10 tips for improving your wireless network
Wireless repeaters extend your wireless network range without requiring you to add any wiring. Just place the wireless repeater halfway between your ...
www.microsoft.com/athome/moredone/wirelesstips.mspx - 20k - Cached - Similar pages -
Wireless N devices should not require repeaters.
Check ur channels are not overlapping. Keep channels at about 6-7 channels apart, IIRC . -
Wide Channel - for Wireless N
Standard Channel - Wireless B/G
Be aware that if you use Wide Channel and has no adapters or network cards that support Wireless N, it will drown out Wireless B/G signal. This could explain why signals are poor even though Wireless N has a good range.
One way is to enable Wireless N on the network adapters or cards. The other way is to disable Wireless N.
And please, if it goes walls, don't expect anything good out of it. -
No it doesn't, connection is excellent.Originally posted by lifeisgood9989:just a question.. when ur laptop is able to connect to ur router, does it get disconnected after a while? 
-
Hi Andrew, thanks for the link, will find out more.Originally posted by AndrewPKYap: -
Hi Shotgun, i still don't quite understand what channel means, especially when you said a little too close, channel is for what purpose ?Originally posted by Shotgun:Wireless N devices should not require repeaters.
Check ur channels are not overlapping. Keep channels at about 6-7 channels apart, IIRC .
Tks. -
Finally called Linksys tech support to clarify with them why their N range product signal is so weak, their answer is simple : don't expect to receive any signal if there is any thick wall aroundOriginally posted by ndmmxiaomayi:Wide Channel - for Wireless N
Standard Channel - Wireless B/G
Be aware that if you use Wide Channel and has no adapters or network cards that support Wireless N, it will drown out Wireless B/G signal. This could explain why signals are poor even though Wireless N has a good range.
One way is to enable Wireless N on the network adapters or cards. The other way is to disable Wireless N.
And please, if it goes walls, don't expect anything good out of it.
All the while i got the impression that the N range product allows me to surf quite a distance away from my router but unfortunately i've never expected that i couldn't received any signal between thick walls, i m shock & confused now.
But strangely how come i can see my neighbours' networks around whenever i logged-in near my router, i thought the signal couldn't pass thru thick walls right ?
I m confused now ? -
Can anyone suggest to me what should i do now, i need to logged-in within a 3 storey premises with many thick walls around.
1. Should I get a Linksys N adapter instead & replaced my current Belkin N1 adapter ?
2. Does Linksys have a speedbooster, if yes, does it help ? (3 storey with many thick walls in between)
Pls advise, thanks for the input guys. -
LOL, standard. About the same as mine.Originally posted by fattyman:Finally called Linksys tech support to clarify with them why their N range product signal is so weak, their answer is simple : don't expect to receive any signal if there is any thick wall around
All the while i got the impression that the N range product allows me to surf quite a distance away from my router but unfortunately i've never expected that i couldn't received any signal between thick walls, i m shock & confused now.
But strangely how come i can see my neighbours' networks around whenever i logged-in near my router, i thought the signal couldn't pass thru thick walls right ?
I m confused now ?
You've got the right impression. Wireless N products have a greater range. But like all wireless products, no walls please. Or anything that affects the signals like microwave or handphone, or it could just drop or totally disappear.
Even if they could go through thick walls, you can't be too far away from it or your network adapters can't "see" the signal.
There's also something called the line of sight. Put it in a simpler way. How well could you see with the corner of your eyes? Anything further than that, you can't see (unless you are an insect).
The same theory applies to routers. As long as it's within the sight of the router, it will be able to detect. -
1. It doesn't matter for the brand.Originally posted by fattyman:Can anyone suggest to me what should i do now, i need to logged-in within a 3 storey premises with many thick walls around.
1. Should I get a Linksys N adapter instead & replaced my current Belkin N1 adapter ?
2. Does Linksys have a speedbooster, if yes, does it help ? (3 storey with many thick walls in between)
Pls advise, thanks for the input guys.
2. Linksys has a speedbooster. You probably will need a few. -
http://www.hyperlinktech.com/web/copyrighted_images/channel_chart.gifOriginally posted by fattyman:Hi Shotgun, i still don't quite understand what channel means, especially when you said a little too close, channel is for what purpose ?
Tks.
Follow this link.
For example, for the "GREEN" channels, channel 1, 6, and 11 are non overlapping. Meaning the Frequencies they operate in are buffered from one another.
If the channels are for example are 1,2,3, then there will be overlapping issues, cos they use the same frequencies at some parts of their 22MHz band. When 2 frequencies transmit together, there will be interference, or even in extremes cancellation of signals. So it is important to not have overlapping channels.
Usually leaving channel assignments to AUTO will avoid this problem, as the router/AP will sense its surrounding to detect which frequencies are being used, and select the best channel for its transmission. -
Thanks for the valuable input mayi, tks.Originally posted by ndmmxiaomayi:1. It doesn't matter for the brand.
2. Linksys has a speedbooster. You probably will need a few. -
With that useful chart of yours, finally i can understand what you are talking about otherwise i know nuts about wireless technology, thanks for the input Shotgun, tks.Originally posted by Shotgun:http://www.hyperlinktech.com/web/copyrighted_images/channel_chart.gif
Follow this link.
For example, for the "GREEN" channels, channel 1, 6, and 11 are non overlapping. Meaning the Frequencies they operate in are buffered from one another.
If the channels are for example are 1,2,3, then there will be overlapping issues, cos they use the same frequencies at some parts of their 22MHz band. When 2 frequencies transmit together, there will be interference, or even in extremes cancellation of signals. So it is important to not have overlapping channels.
Usually leaving channel assignments to AUTO will avoid this problem, as the router/AP will sense its surrounding to detect which frequencies are being used, and select the best channel for its transmission.
