I've noticed that sometimes trains stop in the tunnel when going to Bishan from Braddell. I remembered that 107/108 and 113/114 stopped. Why?
Just askin'. :P
Originally posted by willis_chong:I've noticed that sometimes trains stop in the tunnel when going to Bishan from Braddell. I remembered that 107/108 and 113/114 stopped. Why?
Just askin'. :P
When was it you experienced such "stopping"?
If it was peak hour, the train in front would have caused it to stop.
Originally posted by Oceane:
When was it you experienced such "stopping"?If it was peak hour, the train in front would have caused it to stop.
Yesterday afternoon.
Originally posted by willis_chong:Yesterday afternoon.
Not surprising, the lunchtime express may have caused such a thing to happen.
Originally posted by willis_chong:I've noticed that sometimes trains stop in the tunnel when going to Bishan from Braddell. I remembered that 107/108 and 113/114 stopped. Why?
Just askin'. :P
It's very common to experience this during peak hours eg. morning, lunch time and evening time. Most likely the signal is red. The lights in the tunnel (sometimes) will be turned on to let TO have a better view of what's ahead.
Originally posted by willis_chong:I've noticed that sometimes trains stop in the tunnel when going to Bishan from Braddell. I remembered that 107/108 and 113/114 stopped. Why?
Just askin'. :P
That's Sunday, no peak period.
Originally posted by willis_chong:That's Sunday, no peak period.
Originally posted by willis_chong:Yesterday afternoon.
Originally posted by willis_chong:That's Sunday, no peak period.
huh? yday fri leh bro.
Was it raining?
Originally posted by sinicker:huh? yday fri leh bro.
Yesterday of 6 October. -.-
And no, it wasn't raining.
The train stopped like what it did when approaching a normal station.
I only know that trains normally lower their speeds aft they exit the tunnel aft the 2nd car is out then at the slow speed it stays there then the brakes kicks in..
^ i meant when entering Bishan station only.
Originally posted by willis_chong:The train stopped like what it did when approaching a normal station.
no not that. there are a lot more possibilities:
1. e-brake to 0, then immediately accelerate again
2. e-brake to 18, then accelerate again to 39 or below
3. brake to between 18-39 (CM) and/or inconsistent braking and acceleration
each type can have multiple reasons too. type 1 is usually due to lightning or speed limit exceeded, which requires OCC to reset and grant movement immediately.
type 2 is usually due to speed code limitations.
type 3 is usually due to CM mode.
there is yellow warning light out of braddell today by the way, so I believe it is due to renovations at Bishan platform. you might want to alight at Braddell and see what it says.
Try looking at the board. Might shed some light.
And yes, they are upgrading the northbound platform. So its possible.
Originally posted by Oceane:Try looking at the board. Might shed some light.
And yes, they are upgrading the northbound platform. So its possible.
the platform for Bishan platform i dun tink it's stable...